Electrical products
KBSG Mining Explosion-proof Dry Type Transformer
KBSG Mining Explosion-proof Dry Type Transformer
Mining explosion-proof dry type transformer is used in the mine where there are explosive dangerous. Generally this kind of transformer is dry type. The main structure is that the surface of the tank shell is made according to the requirements of explosive proof , and can withstand an internal pressure of 0.8 MPa.
Summarize:
This series of products can be used in the mine with hazard of explosion due to methane gas and coal-dust, as the distribution equipment of underground mining mechanical equipment.
Technical Parameter:
Rated voltage
Primary voltage: 6kv, 10kv
Secondary voltage: 400v, 693v, 1200v, 3450v
Rated capacity: 50, 100, 200, 315, 400, 500, 630, 800,1000, 1250, 1600, 2000, 2500,3150, 4000(KVA)
Explosion-proof form: mining flameproof Exdl
Use environmental conditions:
Altitude: should be less than 1,000 meters
Environmental temperature
The highest temperature: +40℃
The highest average temperatures: +40℃
The highest annual average temperature: +20℃
The lowest temperature:-20℃
Relative humidity of the air does not exceed 95% (+25℃ )
In the mine with methane gas mixture,coal-dust and explosion danger
Environment without severe turbulence, vibration, the vertical inclination less than 15°
Without gas and steam which corrode metal and destroy insulation.
The power supply voltage waveform approximates sine wave.
Three-phase power supply voltage approximate symmetrical.
Product characteristic:
The iron core use high-permeability and high quality cold rolled steel sheet, small juncture, low dissipation, little noise;
Using new materials, the line between layers, the turn-to-turn using Du Pont NOMEX - 410 insulated material, heat-resisting class H;
Coil vacuum leaching paint. Coil impregnation paint fully permeate deep, 160-170℃ drying curing, high mechanical strength;
Transformer body vacuum drying. The body surface covered by a layer of damp- proof and corona –proof paint, has good insulation performance;
The high and low voltage sides use microcomputer integrated protection, realize the double protective function, have protection to short circuit, over-current, leakage, overvoltage and undervoltage, and realize PLC control and man-machine dialog functions.